Epifanes Interim Coat, White, set 750 grams

A two-component primer / intermediate coat based on epoxy and vinyl resin. Good adhesion properties and impact resistance. Universal paintable with all types of one- and two-component coatings. Because Epifanes Interim Coat contains quartz, it has a coarse surface with an excellent mechanical bonding of the successive layers, however Epifanes Interim Coat not sanding. Also available in 5 kg. application: General adhesive layer for indoor and outdoor, under and above the water line Bonding layer for a variety of antifoulings irrespective of which brand, on polyester and on two component (epoxy) substrates. Occlusive adhesive layer on epoxy systems. Brush Application: Epifanes Thinner D-601 Spray Processing: Epifanes Thinner D-601 Pot life at 20 ° C: 1 hour Advice: Before this product is painted over, the Interim Coat first clean with Epifanes 1-C Spray dilution, benzene, water and ammonia in order to remove from the surface to be verharderresten. Thereafter, well let evaporate. Recoat: After 4 hours at 18 ° C. : Two-component epoxy products After 24 hours at 18 ° C .: antifouling coatings and topcoats maximum Unlimited Recoat with: Above / below the waterline: all two-component epoxy products Below water: all kinds of antifouling Mileage: 8 m2 / l @ 35 micron Recommended dry film thickness: 35 microns Mixing ratio in volume: Basis 86 parts of (A): 14 parts hardener (B) Mix ratio by weight: Basis 90 parts of (A): 10 parts hardener (B)